SOLID.INNOVATIVE.SOLUTIONS.
eNETDNC
eNETDNC Wireless
eNETDNC Monitoring
eNETDNC Data Collection
eNETDNC LT
eNETDNC Hardware
Brochure - PDF
Get A Quote?
eNETDNC Hardware
eHUB Unit
  • This unit is for CNC's with serial ports and a wired ethernet connection to your network.
  • 8 Serial Ports for CNC's, 1 Ethernet Port to connect to network.
  • Comes with power cable.
  • Dimensions 8"W, 1.5"H, 11”L
xl Connect-W Unit
  • This unit is wireless and used on CNC's that have an ethernet port for communications, supports FTP and CAPS.
  • 1 Ethernet Port for CNC, 1 Serial Port for accessories.
  • Comes with 7' CAT-5 cable and 12V power supply.
  • Wireless is 802.11B or G.
  • Dimensions 3.625"W, 1.375"H, 6.125"L
xl Connect-E Unit
  • This unit is for CNC's with a serial port and a wired connection to your network.
  • 1 Serial Port for CNC, 1 Serial Port for accessories, and 1 Ethernet Port to connect to network.
  • Comes with 7' CAT-5 cable and 12V power supply.
  • Dimensions 3.625"W, 1.375"H, 6.125"L
xL Connect-2 Unit
  • This unit is wireless and used on a CNC with a serial port (RS-232).
  • 1 Serial Port for CNC, 1 Serial Port for accessories.
  • Comes with 7' CAT-5 cable and 12V power supply.
  • Wireless is 802.11 B or G.
  • Dimensions 3.625"W, 1.375"H, 6.125"L.
xL Connect-U Unit
  • This unit is wireless and is used on CNC's with USB ports, it mimics a USB thumb drive.
  • 1 USB Port for CNC, 1 Serial Port for accessories.
  • Comes with 4' USB cable and 12V power supply.
  • Wireless is 802.11 B or G.
  • Dimensions 3.625"W, 1.375"H, 6.125"L.
Machine Monitoring Board
  • This unit is for collecting signals from machines such as Cycle On, Feed Hold, Spindle on/off, Feed Rate Override, Spindle Override, etc..
  • 1 Serial Port for connection to eHUB or xlConnect, 1 Serial Port for CNC (optional).
  • DB25 Connector, connects to – 8 Digital outputs, 2 Analog outputs, 1 Digital input. Multiple boards can be connected to a machine.
  • Dimensions 3.375"W, .625"H, 4.5"L
CCD Hand Held Scanner
  • This unit is for scanning data in at the CNC for eNETDNC to use for DNC, Data Collection or Monitoring.
  • 1 Serial Connection for eTerminal
  • Comes with 7' Cable.
  • Dimensions 3.625"W, 1.5"H, 7.375"L
E-Terminal
  • This unit will give you the ability to collect data at the CNC and to easily be able to upload/download programs and enter monitoring events.
  • Comes with 7' CAT-5 cable and 12V power supply.
  • Dimensions 3.875"W, 1.125"H, 7.375”L
xlTRANSFER™ Unit
The xlTRANSFER™ unit is used to transfer/drip feed part programs between a USB flash drive and a CNC control via RS232 port.
The xlTRANSFER™ unit has the following features:
  • Works with just about any USB flash drive up to 4GB (1 GB included).
  • Battery operated (4 AA NiMh rechargeable batteries included).
  • Fully charged unit can continuously operate 8+ hours.
  • For permanent hookup use charger only (included).
  • User friendly interface with 2 line LCD display and 20 key keypad. Keypad symbols can be rotated for full character set.
  • Baud rate values: 300 to 115.2K.
  • Xon/Xoff, CTS/RTS, MZK protocols.
  • Up to 5 user defined and named setups, easily selectable before sending/receiving
  • Real time clock stamps received files with current date on the USB flash drive.
  • File size and last modified date displayed before sending.
  • User can also 'peek' into start of the file before sending to see the program number/comment Drip feed if controls is capable via RS232 port.
  • Included: (1) xlTRANSFER™ unit, (4) AA NiMh rechargeable batteries, (1) 110VAC wall-plug charger, (1) 1GB USB flash memory, (1) RJ45 to DB25M connector, (1) 6 feet cable.
© 2018 - WestCAM Solutions Inc. | Contact Us

Toll Free Number # 1-888-530-6068